The Eastern subterranean termite is the common termite across the South, and in North Alabama its swarms are most often seen in daylight from about February into May. The early signs are mud tubes on foundation walls and piles of discarded wings on sills, windowsills and the floor near them. Finding either one is a reason to call for an inspection.
Key takeaways
- The Eastern subterranean termite is the species most homeowners in the region are likely to meet, and it lives in the soil.
- Swarmers are winged reproductives that leave a colony in daylight, usually from about February to May, so a swarm is often the first thing seen.
- Mud tubes, which are thin earthen passages on foundations, piers and walls, are one of the earliest signs and are worth reporting even when small.
- Discarded wings on a windowsill or a sill plate mean a swarm has landed in or near the building, and they are easy to mistake for dead insects.
- Wood that touches soil, damp crawl spaces and stacked firewood raise the chance that termites reach the structure unnoticed.
- A sign is a reason to inspect, not a diagnosis, because only a walk of the foundation and the lowest part of the house shows whether activity is present.
What do Eastern subterranean termites look like?
Worker termites are pale and soft-bodied, and they are rarely seen because they stay in the soil, the wood and the tubes they build. The winged swarmers are the form most people notice, and they look more like flying ants at first glance.
Subterranean termites live in colonies in the soil and reach wood through the ground. Workers do the feeding and the building. They are pale and they avoid light, which is why a homeowner almost never sees them moving on a floor or a wall. Most of what is seen indoors is evidence they left behind rather than the insects themselves.
Swarmers are the reproductive winged adults that leave a mature colony to start new ones. They have two pairs of wings of about equal length, and the front pair is long enough to reach past the body. Flying ants have a narrower waist and wings of unequal length, which is one of the simplest ways a technician tells the two apart on a windowsill.
Keep the specimen if you find one. A few insects in a sealed container or a folded sheet of paper are enough for identification, and a photograph taken next to a coin helps the technician judge the size. Do not spray a swarm, because that removes the sample and the signs that would have shown where the activity started.
When do termite swarms show up in North Alabama?
Swarms are seen in the daytime from roughly February into May. The timing varies from year to year and from colony to colony, so the window is a guide, not a calendar that can be relied on.
A swarm usually begins on a warm, calm day after rain or a humid spell, and the insects emerge in numbers that can be noticed by anyone looking at a porch light, a window or a ceiling fixture. Many swarmers are seen near windows because they fly toward light, and they can land and shed their wings within a short time.
The window of roughly February through May is the period when most reports of daytime swarms come in. Swarmers seen at other times of year are still worth reporting, because a colony can be active outside that window and a swarm is only one way a colony announces itself.
A winged insect seen once inside is not automatically a termite. A single flying ant, a midge or a moth can look similar from across a room. If the insects are numerous, if they are shedding wings and if you can see a pile of wings near a sill, the sighting deserves a closer look and a call.
What are mud tubes and where do you find them?
Mud tubes are thin passages of soil and debris that termites build to stay out of the open air while they move from the ground to wood. They are one of the earliest visible signs of activity and they are often found where a concrete foundation meets the soil.
Look along the foundation walls on the outside of the house, especially where soil is banked against the brick or block, and at the piers and posts that support a porch or a deck. Tubes can be pencil-thin or thicker, and they are often broken by a passing finger or a foot. A tube that has been broken and then repaired is a sign that the activity is still present.
Inside, check the lowest accessible wood, the sill plate where the house rests on the foundation, and any wood or cardboard that sits on a concrete floor in a crawl space or basement. Tubes on a basement wall or along a pipe are as important as tubes on the outside, because they show that the insects have already crossed into the building.
A mud tube does not tell you how much damage exists. It tells you that termites have reached a point where they needed a covered route. The inspection decides whether the activity is current and where it is coming from, and that is the purpose of the walk that follows the report.
Why are crawl spaces and wood contact places to check?
Wood that touches soil, moisture under a house and a crawl space that is hard to see into are the conditions that let termites reach a structure without much notice. Each one is a point the technician examines on every inspection.
Wood in contact with the ground is the most direct route into a building. Porch steps, stair stringers, deck posts, fence posts attached to the house, and any lattice or trim that sits on soil all offer a way up from the colony. A gap of a few inches between soil and wood is often enough for a technician to see whether the wood is protected or exposed.
Moisture makes a crawl space more attractive to a colony and makes the wood more likely to be damaged. Standing water after heavy rain, a dirt floor that stays damp, a torn vapor barrier and a gutter that drains next to the foundation are all conditions the technician records. Those conditions do not prove termites are present, but they show where to look harder.
Stored material is the other common hiding place. Cardboard boxes, old lumber, firewood stacked against the house and clothing left on a crawl space floor all give termites a route and a shelter. Moving them before the inspection saves time, and the report will note any area the technician could not reach.
What does a termite inspection look for?
A termite inspection walks the outside of the house, the crawl space or basement, the attic where accessible, and the wood that is reachable. Its purpose is to find active signs, record what was found and say which areas could not be checked.
On the outside, the technician looks at the foundation, the mud tubes, the wood in contact with the soil, the downspouts and the grading around the walls. Each finding is noted with its location, because a tube on the north side of a house tells a different story from one on the rear porch.
Inside, the technician checks the sill plate, the joists and subfloor where they can be reached, the framing around plumbing penetrations and any wall that has been opened for repairs. A probe is used on wood that looks damaged, and the result is recorded. A finding of damage is different from a finding of current activity, and the report should say which one has been seen.
The inspection ends with a written record. It lists the areas inspected, the signs found, the areas that could not be reached and any recommended treatment or repair. Recommendations for other trades are named as such, so that the termite work is not mixed up with carpentry or moisture correction.
What treatment approaches do technicians discuss?
There are two broad approaches to subterranean termites: a bait program placed in the ground around the building, and a soil barrier treatment applied along the foundation. The technician recommends one after the inspection, not before.
A bait program places monitoring and feeding stations in the soil around the building and checks them on a schedule. The aim is to draw foraging termites into a bait that is carried back to the colony. Progress is measured by what is found at each station over time, so the approach needs regular visits and a written record of those visits.
A soil barrier is a treatment applied to the soil next to the foundation, so that termites moving through it meet the product before they reach the structure. It is usually applied where the soil is accessible and the building allows it. The label governs where it may go, how much is used and how long people and pets should stay away from a treated area.
Neither approach is chosen by default. The inspection decides which one suits the building, the access and the activity found. Ask the technician to explain the reasons for the recommendation in writing, and to say what follow-up visits are planned and what would change the plan.
What should you do when you find a sign?
Stop, record, and call for an inspection. Keep the evidence, avoid disturbing the sign and avoid treating it yourself, since a product applied before the inspection can hide what the technician needs to see.
Take a few clear photographs of the sign, a wide shot showing where it is and a close shot showing its detail. Note the date, the room or the outside wall, and whether the sign was new or had been there before. Keep any wings or insects in a sealed container, and do not sweep them away.
Call (855) 974-4733 and describe what you found and where. The person who takes the call will arrange an inspection and will ask about the building, the crawl space and any treatment that has already been done. If you have a previous termite report or a warranty from an earlier owner, have it ready, because it tells the technician what was checked before.
Do not drill, cut or open a wall to look for the activity, and do not dig out a mud tube to see what is inside. Those steps spread the problem, damage the evidence and can introduce moisture where it was not present. The technician has tools and a plan for opening the building safely.
Frequently asked questions
Are termites in North Alabama only a problem in spring?
Swarms are most often seen in daylight from roughly February into May, but a colony works all year. A sign seen in another season is still worth reporting, because it can point to activity that is not visible from the outside.
Is a flying ant inside my house a termite?
Sometimes, and often not. Termite swarmers have two pairs of wings of nearly equal length and a thick waist, while flying ants have a narrow waist and wings of unequal length. Keep one for identification and call for an inspection if you are unsure.
Can I treat termites myself if I find one?
It is better to call for an inspection first. A product applied before the walk can hide the signs the technician needs, and product labels set rules about where and how it may be used. The inspection decides the approach.
What if the crawl space cannot be entered?
The technician records it as an area that was not reached, and the report says so. An unreached area is not a clean area, and the plan will explain how the gap is handled and whether a later visit is needed.
This guide is general information for Madison County homeowners, not a substitute for an on-site inspection. Prices are estimates. See our disclaimer.