What the inspection really looks at
The inspection is a search for contact, moisture and hidden passages rather than a hunt for insects.
Termites need a route from the soil to the wood, and the inspection maps the routes. Mud tubes on a foundation wall are the most direct evidence of a route in use. Wood that sits in contact with the soil or concrete, with no gap or treatment between them, is the second thing the technician checks, because that contact is what the colony uses.
Access decides how much can be seen. Where a wall is finished, a floor is sealed or an attic is closed, the report says so and lists the area as not inspected. A second visit can look at those spaces once access is opened, and that request should be made in writing so it is not forgotten at the end of a sale.
Moisture is the factor you can change
Termites need moisture as much as they need wood, and much of the moisture in a house is avoidable.
Gutters that overflow, downspouts that discharge against the wall, irrigation that sprays the siding and a crawl space holding water all make a structure easier to infest. Correcting those conditions does not remove a colony, but it removes the reason the colony came and makes any treatment last longer.
A technician points out the drainage problems that matter most and suggests the simplest fix for each. Grading soil away from the wall, moving mulch back from the foundation and clearing debris from the crawl space are often the first steps, and they need only a few hours of attention from the owner.
Treatment options in plain terms
Treatment is chosen after the inspection, and the choice depends on where termites are and how the building is used.
A soil treatment creates a treated zone in the ground around the structure, and it is applied at points where access allows, often along the footing and beside slabs. A baited monitoring system works more slowly, with stations placed in the soil and checked on a schedule. Both aim at subterranean termites, and both need the follow-up that makes them work.
Either method is applied according to the label and the state rules for pesticide use, by a technician holding the state license for that work. You can ask to see the license and verify it with the Alabama Department of Agriculture and Industries, which regulates pesticide use in the state.
Reading a termite report
A written report is the document you keep, and it should be specific about what was found and what was not.
A useful report lists the locations inspected, the evidence seen with a short description, the conditions that favor termites and the recommended steps in priority order. It also states its limits. Anything hidden behind finished walls, under a sealed floor or in an area that was not accessible is listed as not inspected rather than presumed clear.
If the report will be shown to a buyer, ask the technician to explain each section in plain words before it leaves the office, and to note any area that still needs access. Huntsville Pest Control keeps a copy on file so the monitoring record can be compared with any later report.